FHL-440-5ZI
Low-Displacement Head Studs – Types FHL, FHLS
FHL-440-5ZI
Low-Displacement Head Studs – Types FHL, FHLS
PEM® self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly and evenly around the ribs and into the annular groove – creating a flushhead assembly and securely locking the stud into the sheet with high torque-out and pushout resistances.
FHL (flush low-displacement head) Studs install closer to the edge of a sheet than PEM Types FH/FHS studs without causing that edge to bulge.- Installs closer to the edge of a sheet than PEM Type FH/FHS studs without causing that edge to bulge.
- Flush-head for sheet thickness .040” and greater.
- Type FHL is recommended for use in steel or aluminum sheets HRB (Rockwell “B” Scale) 80 or less and HB (Hardness Brinell) 150 or less.
- Type FHLS is recommended for use in steel or aluminum sheets HRB (Rockwell “B” Scale) 70 or less and HB (Hardness Brinell) 125 or less.
Specifications
- Gewinde Code
- 440
- Thread Size
- .112-40 (#4-40)
- Thread Specification
- 2A, ASME B1.1
- Fastener Material
- Hardened Carbon Steel
- Standard Finish
- Colorless, SC1 (5µm), Type III, Zinc plated per ASTM B633
- For Use in Sheet Hardness
- HRB 80 / HB 150 or less
- Product Category
- Low-Displacement Head Studs – Types FHL, FHLS – Unified
- Thread Type
- External
- Brand
- PEM
- PEM Product Family
- FHL
- Product Type
- Nieten
- H ± .015_in
- 0.138in
- Hole Size in Sheet +.003 – .000_in
- in
- L Len Pm 015in Or 4mm
- 0.312in
- Min. Dist. Hole C/L to Edge_in
- 0.124in
- S Max._in
- 0.085in
Installation & Performance Data
| Type | Thread Code | Installation (lbs.) | Anvil Dim A (in.) | Anvil Dim C (in.) | Haeger Anvil For Sheet <= .059 (in.) | Haeger Anvil For Sheet > .060 (in.) | Haeger Punch | Pemserter Anvil For Sheet <= .059 (in.) | Pemserter Anvil For Sheet > .060 (in.) | Pemserter Punch | PULL THRU (lbs.) | PULL THRU TEST BUSHING HOLE SIZE (in.) | Pushout (lbs.) | REC. NUT TIGHTENING TORQUE (in. lbs.) | SHEET HARDNESS HRB | TEST SHEET THICKNESS & MATERIAL | Torque-out (in. lbs.) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FHL, FHLS | 440 | 1000 | .136 – .140 | .113 – .116 | H-103-4LC | H-103-4L | H-108-0020L | 8003298 | 8003618 | 975200997 | 300 | 0.132 | 60 | 3.5 | 33 | .047″ Aluminum | 5 |
| FHL, FHLS | 440 | 1200 | .136 – .140 | .113 – .116 | H-103-4LC | H-103-4L | H-108-0020L | 8003298 | 8003618 | 975200997 | 580 | 0.132 | 105 | 6.8 | 54 | .045″ Steel | 11 |
Inventory
| Vertriebspartner | Quantity | Kontakt | Telefonnummer | Adresse | Bürostandorte |
|---|