THFE-0518-16ZI

Heavy Duty Studs for Thin Sheets – Type THFE

THFE-0518-16ZI

Heavy Duty Studs for Thin Sheets – Type THFE

Enlarged head diameter reduces stress on panel.
Thicker head allows for larger hole in attached panels.
Clinch design provides high-strength in sheets as thin as .031”.
Recommended for use in steel or aluminum sheets HRB (Rockwell “B” Scale) 85 or less and HB (Hardness Brinell) 165 or less.

Request Samples

Gewinde Code: 0518
Thread Size: .313-18 (5/16-18)
Thread Specification: 2A, ASME B1.1
Fastener Material: Hardened Carbon Steel
Standard Finish: Colorless, SC1 (5µm), Type III, Zinc plated per ASTM B633
For Use in Sheet Hardness: HRB 85 / HB 165 or Less
Product Category: Heavy Duty Studs for Thin Sheets – Type THFE – Unified
Thread Type: External
Brand: PEM
PEM Product Family: THFE
Product Type: Nieten

H ± .01_in: 0.586in
Hole Size in Sheet +.005 – .000_in: 0.312in
Hole Size in Sheet + 0.13_mm: mm
L Len Pm 015in Or 4mm: 1in
L ± 0.4_mm: mm
Min. Dist. Hole C/L to Edge_in: 0.596in
S Max._in: 0.117in
T Max._in: 0.099in

Type	Thread Code	Installation (lbs.)	Anvil Dim A (in.)	Anvil Dim C (in.)	Haeger Anvil For Sheet .031 to .066 (in.)	Haeger Anvil For Sheet > .066 (in.)	Haeger Punch	Pemserter Anvil For Sheet .031 to .066 (in.)	Pemserter Anvil For Sheet > .066 (in.)	Pemserter Punch	PULL THRU (lbs.)	Pushout (lbs.)	REC. NUT TIGHTENING TORQUE (ft. lbs.)	SHEET HARDNESS HRB	TENSILE STRENGTH (lbs.)	TEST BUSHING HOLE SIZE FOR PULL THRU TESTS (in.)	TEST SHEET THICKNESS & MATERIAL	Torque-out (in. lbs.)
THFE	518	11700	.374 – .378	.3125 – .3155	H-103-05LC	H-103-05L	H-108-0020L	8019887	970200011300	8019891	5701	131	18	44	6280	0.402	.031″ Aluminum	103
THFE	518	16000	.374 – .378	.3125 – .3155	H-103-05LC	H-103-05L	H-108-0020L	8019887	970200011300	8019891	5772	187	18	47	6280	0.402	.031″ Cold-rolled Steel	124

Vertriebspartner	Quantity	Kontakt	Telefonnummer	Adresse	Bürostandorte