SH-M8-1X
Type SH™ Hard Panel Nuts
SH-M8-1X
Type SH™ Hard Panel Nuts
- Installs into thin, harder, high strength steel materials (high strength steel sheets at 975MPA maximum ultimate tensile)
- Allows overall weight reduction for all vehicles
- Provides lower installed cost
- Unplated threads may be oversized sized as permitted by thread standards to accept minimum plating thickness of .00020”/.0051 mm
Compare to other thin sheet fastening devices:– Addresses environmental concerns
- Smaller outer diameter
- Lighter weight
- Flush on reverse side of panel
- Close to edge of panel mounting
- No embossing required
- Hardened nut material provides stronger thread strength
- Can be installed automatically using press or in-die technology
仕様
- Thread Code.jp
- M8
- ねじ径
- M8 x 1.25
- ねじの仕様
- 6H, ASME B1.13M
- Shank Code
- 1
- ファスナー材質
- Hardened Alloy Steel
- 表面処理
- No Finish (with Rust Preventative Oil)
- For Use in Sheet Hardness
- HRC 30 / HB 277 or Less
- Product Category
- Type SH™ Hard Panel Nuts – Metric
- Thread Type
- Internal
- ブランド
- PEM
- Hole Size in Sheet +.003 / +0.08mm_mm
- 10.5mm
- PEM®製品
- SH
- 製品
- ナット
- A Shank Max
- 1.38mm
- E ± 0.25_mm
- 12.7mm
- Hole Size in Sheet + 0.08_mm
- 10.5mm
- Min. Dist. Hole C/L to Edge_mm
- 9.7mm
- C Max._mm
- 10.47mm
- T ± 0.25_mm
- 5.47mm
在庫
| 販売業者 | 在庫 | お問い合わせ | 電話番号 | 住所 | ロケーション |
|---|