SPECIAL NOTE: When the remaining inventory of ATLAS’ SpinTite and PlusTite rivet nut lines is depleted, Sherex equivalent rivet nut parts will take their place. For this reason, we are providing the ATLAS and Sherex part number equivalents with links to the corresponding Sherex rivet nut at the following link: Sherex-ATLAS Equivalencies. On the Sherex rivet nut product pages, you will be able to view product data and download CAD prints and 3D models of the installed versions of Sherex rivet nuts.
AESSM8KB11.1
Countersunk Head Threaded Insert – Closed End Keyed
SPECIAL NOTE: When the remaining inventory of ATLAS’ SpinTite and PlusTite rivet nut lines is depleted, Sherex equivalent rivet nut parts will take their place. For this reason, we are providing the ATLAS and Sherex part number equivalents with links to the corresponding Sherex rivet nut at the following link: Sherex-ATLAS Equivalencies. On the Sherex rivet nut product pages, you will be able to view product data and download CAD prints and 3D models of the installed versions of Sherex rivet nuts.
AESSM8KB11.1
Countersunk Head Threaded Insert – Closed End Keyed
- Designed for high load applications. Countersunk feature allow fastener to be installed flush with sheet surface.
Specifications
- Thread Size X Pitch
- M8 x 1.25
- Standard Material
- 430 Series Stainless Steel
- Identification Mark
- 3 Rad.
- Weight per 1000_lb
- 27.0
- Product Category
- Countersunk Head Threaded Insert – Closed End Keyed
- CAD Supplier
- PennEngineering® (Atlas®)
- CADPartID
- 103646
- Fastening
- Uninstalled
- ATLAS products Grip Range
- 11.10mm, 9.10mm, 9.10mm – 11.10mm
- Base Panel Material
- Aluminum, Brass, Copper, Hard Steel, Stainless Steel, Steel
- Brand
- ATLAS
- Fastener Characteristics
- Threaded Internal
- Installation Equipment/Method
- Hand Tools
- Product Type
- Blind Threaded Inserts
- Technology Type
- Riveting
- Unit (Metric/Unified)
- Metric
- B Ref._mm
- 16.65mm
- E Max._mm
- 12.82mm
- F + 0.13_mm
- 3.05mm
- H – Keyway Height_mm
- 2.46 – 2.59mm
- Install Drill Size Ref._mm
- 10.50mm
- Install Hole Size Max._mm
- 10.75mm
- Install Hole Size Min._mm
- 10.50mm
- K Ref._mm
- 12.23mm
- L ± 0.38_mm
- 34.50mm
- C Max._mm
- 2.64mm
- øD – 0.1_mm
- 10.48mm
- P – Keyway Width + 0.08_mm
- 3.25mm
- Pull Up Factor_mm
- 3.18mm
Inventory
| Distributor | Quantity | Contact | Phone | Address | Locations |
|---|