FH-M4-10ZI
Self-Clinching Threaded Studs – Type FH/FHS/FHA
FH-M4-10ZI
Self-Clinching Threaded Studs – Type FH/FHS/FHA
PEM® self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly and evenly around the ribs and into the annular groove – creating a flushhead assembly and securely locking the stud into the sheet with high torque-out and pushout resistances.
FH (flush-head) studs are available in aluminum, steel, or stainless steel. They are also available unthreaded on special order. – Flush-head in designated minimum sheet thickness or greater.
- Type FH is recommended for use in steel or aluminum sheets HRB (Rockwell “B” scale) 80 or less and HB (Hardness Brinell) 150 or less.
- Type FHS is recommended for use in steel or aluminum sheets HRB (Rockwell “B” scale) 70 or less and HB (Hardness Brinell) 125 or less.
- Type FHA is recommended for use in aluminum sheets HRB (Rockwell “B” scale) 50 or less and HB (Hardness Brinell) 82 or less.
Especificaciones
- Código de rosca
- M4
- Tamaño de rosca
- M4 x 0.7
- Especificación de rosca
- 6g, ASME B1.13M
- Material del inserto
- Hardened Carbon Steel
- Acabado Estandard
- Colorless, SC1 (5µm), Type III, Zinc plated per ASTM B633
- Para uso en láminas de dureza
- HRB 80 / HB 150 or less
- Categoría del producto
- Self-Clinching Threaded Studs – Type FH/FHS/FHA – Metric
- Tipo de rosca
- External
- Marca
- PEM
- Hole Size in Sheet +.003 / +0.08mm_mm
- 4mm
- Producto de la familia PEM
- FH
- Tipo de producto
- Pernos
- H ± 0.4_mm
- 5.9mm
- Tamaño del orificio en la lámina + 0.08_mm
- 4mm
- L ± 0.4_mm
- 10mm
- Dist. Mín orificio cercano al borde_mm
- 7.2mm
- S Max._mm
- 2.4mm
Recursos
Datos de instalación y rendimiento
| Type | Thread Code | Anvil Dim A + 0.1 (mm) | Anvil Dim C + 0.08 (mm) | Haeger Anvil For Sheet <= 1.51 (mm) | Haeger Anvil For Sheet > .1.51 (mm) | Haeger Punch | Installation (kN) | Pemserter Anvil For Sheet > .1.51 (mm) | Pemserter Anvil For Sheet <= 1.51 (mm) | Pemserter Punch | PULL THRU (N) | Pushout (N) | REC. NUT TIGHTENING TORQUE (N•m) | SHEET HARDNESS HRB | TEST SHEET THICKNESS & MATERIAL | Torque-out (N•m) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FH | M4 | 4.6 | 4.03 | H-103-M4LC | H-103-M4L | H-108-0020L | 20 | 970200019300 | 970200244300 | 975200048 | 4448 | 975 | 2.1 | 29 | 1.6 mm Aluminum | 2.9 |
| FH | M4 | 4.6 | 4.03 | H-103-M4LC | H-103-M4L | H-108-0020L | 28.9 | 970200019300 | 970200244300 | 975200048 | 5650 | 1780 | 2.7 | 59 | 1.5 mm Steel | 4.2 |
Inventario
| Distribuidor | Cantidad | Contacto | Teléfono | Dirección | Ubicaciones |
|---|