FHLS-632-10
Low-Displacement Head Studs – Types FHL, FHLS
FHLS-632-10
Low-Displacement Head Studs – Types FHL, FHLS
PEM® self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly and evenly around the ribs and into the annular groove – creating a flushhead assembly and securely locking the stud into the sheet with high torque-out and pushout resistances.
FHL (flush low-displacement head) Studs install closer to the edge of a sheet than PEM Types FH/FHS studs without causing that edge to bulge.- Installs closer to the edge of a sheet than PEM Type FH/FHS studs without causing that edge to bulge.
- Flush-head for sheet thickness .040” and greater.
- Type FHL is recommended for use in steel or aluminum sheets HRB (Rockwell “B” Scale) 80 or less and HB (Hardness Brinell) 150 or less.
- Type FHLS is recommended for use in steel or aluminum sheets HRB (Rockwell “B” Scale) 70 or less and HB (Hardness Brinell) 125 or less.
Especificaciones
- Código de rosca
- 632
- Tamaño de rosca
- .138-32 (#6-32)
- Especificación de rosca
- 2A, ASME B1.1
- Material del inserto
- 300 Series Stainless Steel
- Acabado Estandard
- Passivated and/or tested per ASTM A380
- Para uso en láminas de dureza
- HRB 70 / HB 125 or Less
- Categoría del producto
- Low-Displacement Head Studs – Types FHL, FHLS – Unified
- Tipo de rosca
- External
- Marca
- PEM
- Producto de la familia PEM
- FHLS
- Tipo de producto
- Pernos
- H ± .015_in
- 0.164in
- Hole Size in Sheet +.003 – .000_in
- in
- L Len Pm 015in o 4mm
- 0.625in
- Min. Dist. Hole C/L to Edge_in
- 0.15in
- S Max._in
- 0.09in
Datos de instalación y rendimiento
| Type | Thread Code | Installation (lbs.) | Anvil Dim A (in.) | Anvil Dim C (in.) | Haeger Anvil For Sheet <= .059 (in.) | Haeger Anvil For Sheet > .060 (in.) | Haeger Punch | Pemserter Anvil For Sheet <= .059 (in.) | Pemserter Anvil For Sheet > .060 (in.) | Pemserter Punch | PULL THRU (lbs.) | PULL THRU TEST BUSHING HOLE SIZE (in.) | Pushout (lbs.) | REC. NUT TIGHTENING TORQUE (in. lbs.) | SHEET HARDNESS HRB | TEST SHEET THICKNESS & MATERIAL | Torque-out (in. lbs.) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FHL, FHLS | 632 | 1000 | .162 – .166 | .139 – .142 | H-103-6LC | H-103-6L | H-108-0020L | 8003299 | 8003314 | 975200997 | 325 | 0.158 | 65 | 4.7 | 33 | .047″ Aluminum | 6.5 |
| FHL, FHLS | 632 | 1500 | .162 – .166 | .139 – .142 | H-103-6LC | H-103-6L | H-108-0020L | 8003299 | 8003314 | 975200997 | 650 | 0.158 | 110 | 9 | 54 | .045″ Steel | 15 |
Inventario
| Distribuidor | Cantidad | Contacto | Teléfono | Dirección | Ubicaciones |
|---|