FHS-173-20
Self-Clinching Pins – Type FH, FHS, FHA
FHS-173-20
Self-Clinching Pins – Type FH, FHS, FHA
PEM® self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly and evenly around the ribs and into the annular groove – creating a flushhead assembly and securely locking the stud into the sheet with high torque-out and pushout resistances.
FH (flush-head) studs are available in aluminum, steel, or stainless steel . They are also available unthreaded on special order.- Flush-head for sheet thickness of .040” and greater.
- Type FH is recommended for use in steel or aluminum sheets HRB (Rockwell “B” Scale) 80 or less and HB (Hardness Brinell) 150 or less.
- Type FHS is recommended for use in steel or aluminum sheets HRB (Rockwell “B” Scale) 70 or less and HB (Hardness Brinell) 125 or less.
- Type FHA is recommended for use in aluminum sheets HRB (Rockwell “B” Scale) 50 or less and HB (Hardness Brinell) 82 or less.
Especificaciones
- Código de rosca
- 173
- Material del inserto
- 300 Series Stainless Steel
- Acabado Estandard
- Passivated and/or tested per ASTM A380
- Para uso en láminas de dureza
- HRB 70 / HB 125 or Less
- Categoría del producto
- Self-Clinching Pins – Type FH, FHS, FHA – Unified
- Tipo de rosca
- Unthreaded
- Marca
- PEM
- Producto de la familia PEM
- FHS
- Tipo de producto
- Pines
- H ± .015_in
- 0.26in
- Hole Size in Sheet +.003 – .000_in
- in
- L Len Pm 015in o 4mm
- 1.25in
- Min. Dist. Hole C/L to Edge_in
- 0.28in
- P ± 0.05mm/±.002in_in
- 0.173in
- S Max._in
- 0.1in
Inventario
| Distribuidor | Cantidad | Contacto | Teléfono | Dirección | Ubicaciones |
|---|